Main Specifications:

1. Copy Speed, (15 ips)38cm/s

2. Rewind Time, (C-60) 100 seconds

3. Frequency Response, 50Hz - 10kHz

4. Equalization, Type I Type I or II

5. Signal to Noise (A Weighted),49 dB

6. Crosstalk Rejection,> 54 dBtracks 2&3 tracksat1 kHz

7. Distortion (typically at nominal level), < 3.0% T.H.D.

8. Flutter (WTD), <0.15%

9. Power Requirements, 220VAC, 50/60 Hz

10. Power Consumption, Approx. 60W

11. Erase Heads,Ferrite

12. Weight,12 kg

13. Unit Warranty,1 year limited

14. Head Warranty,1 year
　　 Side View, Depth 340mm/Height
　　 160mm/Longth 435mm

 

The Details:

1. Models available which copy at up to 8x speed,

A special two motors mechanism, R232Aheads, four channel (stereo), and can be configured to meet almost any requirement.

All models include Ferrite erase heads, end-of-tape sensing and autostop.

The R232A head offers long life with exceptional audio

response and channel separation (crosstalk rejection).

2. Recommended Tape Usage

Use only high quality cassette tapes with 3168 system.

Some inexpensive tapes can cause poor quality recordings

and premature tape head wear. You can use either normal bias 120 μs (Type 1) or high bias (70 μs Cr02/Type II) types of cassettes.

You can use C-30, C-60 or C-90 cassettes, but C-120 cassettes are likely to break and thus are not recommended.

Metal (Type IV) tapes are not recommended.